Dugganite Driveway Paint

Product Description

Dugganite Driveway is a water-borne acrylic coating designed for the decoration and refurbishment of tarmac and concrete paths and driveways. It produces a tough, water- and oil-resistant finish that enhances the appearance of coated surfaces. Note: Not recommended for extremely smooth, dense surfaces such as imprinted concrete.

Product Uses

• Decoration and refurbishment of tarmac and concrete driveways

Pack Sizes Available

• 5 litres
• 10 litres

Colour Range

• Black
• Red
• Green
• Grey

Technical Data

• Specific Gravity: Approx. 1.3
• Solids Content: Approx. 55% w/w (Approx. 40% v/v)
• Flash Point: Non-flammable
• Recommended Spreading Rate: 2–3 m² per litre
• Drying Time: Approx. 2–4 hours at 20°C / 65% RH
• Overcoating Time: Approx. 6–8 hours at 20°C / 65% RH. Allow minimum 24 hours before parking cars on coated surfaces
• Recommended Dry Film Thickness: Approx. 160 microns
• Minimum Application Temperature: 5°C and rising
• Do not apply during damp or frosty weather, or when rain is imminent

Method of Application

• Brush
• Roller
• Airless spray

Surface Preparation

All surfaces must be clean, sound, and dry. Prepare in accordance with BS6150 – Painting of Buildings: Code of Practice. Treat organic growth with a fungicidal solution and apply a proprietary weed killer to any plant growth.

Thinning & Cleaning

• If required, thin with clean water (maximum ratio: 1 part water to 10 parts Dugganite Driveway).
• Clean equipment immediately after use with water and detergent.

Storage

• Minimum 12 months shelf life in original sealed containers
• Protect from frost and direct heat

Safety & VOC Information

• VOC limit for this product (Cat A/i): 140 g/l (2010)
• Actual VOC content: Maximum 10 g/l
• Refer to safety data sheet before use

Disposal

• Liquid or part-used containers: Non-hazardous waste code 08 01 12
• Empty containers with dry residue:
• Plastic: 15 01 02
• Metal: 15 01 04